Trinity Ethernet Interface

Peripheral


Colin Piggot / Quazar


Colin Piggot


2005-

Ethernet Interface, with built in 128K EEPROM for settings, and MMC/SD card slot for mass storage.

Current status: Released. Priced £69.99.


Mass Storage for SAM files using MMC and SD cards supported with B-DOS 1.5t


Unveiled in issue 19 of Sam Revival magazine.

In Development: Port of uIP TCP/IP Stack by Adrian Brown, Ethernet driver by Simon Owen.

Re:Trinity Ethernet Interface

Just to update the preliminary information that’s in Sam Revival 19, I’ve increased the size of the EEPROM from 8K to 128K to allow for more settings storage space for ethernet applications, and a much more flexible allocation system.

Hoping the PCBs arrive in the next few days to get the first few production units built up. More info, and the first programming article is due to appear in the next issue of Sam Revival at the end of October.

Colin
=====
Quazar : Hardware, Software, Spares and Repairs for the Sam Coupe
1995-2007 - Celebrating 12 Years of developing for the Sam Coupe
Website: http://www.samcoupe.com/

Re: Trinity Ethernet Interface

Trinity is now released, priced at £69.99 + postage.

Simon Owen and Adrian Brown have had theirs for about two weeks now and are making rather rapid progress towards a completed TCP/IP stack.

Colin
=====
Quazar : Hardware, Software, Spares and Repairs for the Sam Coupe
1995-2007 - Celebrating 12 Years of developing for the Sam Coupe
Website: http://www.samcoupe.com/

Re: Trinity Ethernet Interface

Mass storage is now supported with B-DOS 1.5t, supporting MMC and SD cards up to 1GB in size with the currently released version. This will be bundled with the Trinity Ethernet Interface, as well as sent out to existing owners, and it’s also on the coverdisk with SAM Revival issue 21.

Colin
=====
Quazar : Hardware, Software, Spares and Repairs for the SAM Coupe
1995-2008 - Celebrating 14 Years of developing for the SAM Coupe
Website: http://www.samcoupe.com/

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.